| Last Modified: 11-29-2007 | 1.6 S | |
| Service Category: Vehicle Exterior | Section: Window/Glass | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F50000X |
| Title: WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: DIAGNOSTIC TROUBLE CODE CHART (2008 Sequoia) | ||
DIAGNOSTIC TROUBLE CODE CHART
HINT:
If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to "See page" below.
|
DTC Code |
Detection Item |
Suspected Part |
See page |
|---|---|---|---|
|
B2221 |
Jam Protection Pulse Sensor Circuit on Back Door |
- Back door power window regulator motor - Back door ECU - Harness or connector |
|
|
B2311 |
Power Window Motor Malfunction |
- Power window regulator motor - Battery disconnection when ignition switch ON - Incorrect installation of power window components - Overheated power window regulator motor |
|
|
B2312 |
Power Window Switch Malfunction |
- Power window regulator master switch - Power window regulator switch - Power window regulator motor - Harness or connector - Power window regulator master switch held in same position for more than 20 sec. - Power window regulator switch held in same position for more than 20 sec. |
|
|
B2313 |
Glass Position Initialization Incomplete |
- Power window regulator motor - Power window regulator motor not initialized |
|
|
|